ACME GroupD Drive Isolation Transformer

Manufacturer: ACME

575 Delta Primary Volts - 460Y/266 Secondary Volts - All Acme Drive Isolation Transformers (DITs) above 7.5kVA are wound with strip windings to ensure the lowest possible eddy current losses. All our DITs use a three leg wound core. This superior design has very low losses and quiet operation. Both of these features combine to significantly reduce losses and operation costs compared to other types of constructions. All Acme DITs up to and including the 220kVA have copper terminations. The transition from aluminum strip coil conductors to copper terminations is accomplished by a bonding process known as "Koldwelding" This process has been used by Acme for over 25 years to provide a trouble-free, permanent bonding of the two metals.

More+

Features Model

7.5-20.0 kVA are encapsulated, UL 3R
3-Phase 60 Hertz
180 deg C and 220 deg C insulation systems
Acme’s reinforced core assemblies enhance quiet operation
Nominally 6% impedance
Designed for use with AC, adjustable frequency or DC drives
Full capacity taps are featured on all units. On 7.5 through 20 kVA units, taps are 1-5% ANFC and 1-5% BNFC.
Full range of kVA ratings cover all standard drive systems
Ample wiring compartment for easy cable entry
Optional wall mounting brackets for certain sizes
Stress relief: Acme uses strip conductors (above 7.5 kVA) instead of wire for a DIT series that easily accommodates the severe electrical and mechanical stresses found in today’s AC & DC motor drives. The inherent excellent line isolation of these transformers is further enhanced with the extra protection of Acme’s Electrostatic Shield — free in all DIT’s.
Lower losses: The harmonic currents generated by AC & DC drives increase eddy current losses (heat) in transformer windings. The thicker the winding conductor, the greater the losses. Acme uses one turn per layer of thin strip conductor which provides lower eddy current losses than comparable wire wound units. Lower losses = cooler operation and longer transformer life.
Reduced short circuit forces: Strip windings minimize axial short circuit forces that can cause mechanical displacement of the windings under fault conditions. For extra protection all designs 7.5 kVA and above use primary and secondary coils of equal axial length. This feature tends to negate axial short circuit forces, further improving transformer life expectancy.

Mfr. Part No.	Description
DTHB72S	7.5 kVA Drive Isolation Transformer
DTHB7TS	7.5 kVA Drive Isolation Transformer
DTHB0112S	11 kVA Drive Isolation Transformer
DTHB0142S	14 kVA Drive Isolation Transformer
DTHB0202S	20 kVA Drive Isolation Transformer
DTHB020TS	20 kVA Drive Isolation Transformer
DTHB0274S	27 kVA Drive Isolation Transformer
DTHB0344S	34 kVA Drive Isolation Transformer
DTHB0404S	40 kVA Drive Isolation Transformer
DTHB0514S	51 kVA Drive Isolation Transformer
DTHB0634S	63 kVA Drive Isolation Transformer
DTHB0754S	75 kVA Drive Isolation Transformer
DTHB0934S	93 kVA Drive Isolation Transformer
DTHB01184S	118 kVA Drive Isolation Transformer
DTHB01454S	145 kVA Drive Isolation Transformer
DTHB01754S	175 kVA Drive Isolation Transformer
DTHB02204S	220 kVA Drive Isolation Transformer
DTHB002754S	275 kVA Drive Isolation Transformer
DTHB03304S	330 kVA Drive Isolation Transformer
DTHB04404S	440 kVA Drive Isolation Transformer

ACME GroupD Drive Isolation Transformer

Inquiry

Most Searched Keywords