Home Programmable Logic Controller (PLC) Fanuc IC655MDL555 PLC

Fanuc IC655MDL555 PLC

share
Fanuc IC655MDL555 PLC
Manufacturer: Fanuc

This module provides 16 circuits for controlling user output loads. The output switching capacity of this module is two amps. 16 LEDs on the front of the module provide a dual function. First, they provide a visual indication of the status of each output circuit, with each LED reflecting the ON or OFF state of the corresponding circuit. Second, when commanded through programming, they indicate the starting I/O address for the module. Connections to each circuit are made to the removable terminal block on the front of the module. The output circuits are divided into four groups internally. On the terminal block, the groups are combined and are labeled A and B, with 8 circuits in each group. The terminals in each group are labeled 1 to 8. Each group of eight has a single common connection, labeled C. The user must supply a 24 VDC source of power, which provides power for both the load and the output circuit. Both groups can be powered from a single power source or each group can be powered from a separate source.

More+
Features Model
  • Output Circuit Type: P-MOS FET, open drain
  • Number of Circuits: 16
  • Internal Circuit Grouping: Four groups, four circuits per group. (One common for each two groups)
  • Operating Voltage: 5.0 to 26.4 VDC
  • Peak Voltage: 40.0 V-DC
  • Maximum Operating Current: 2 amps; 10 amps/common; 20 amps/module
  • Maximum Leakage Current: 0.1 m.A at 40 VDC
  • ON Voltage Drop: 0.5 VDC at 2 amps; 0.2 VDC at 1 amp
  • Smallest Recommended Load: 0.2 mA at 5 VDC
  • Maximum Inrush current: 6 amps for 100 ms; 12 amps for 10 ms
  • OFF to ON Response: 0.1 ms
  • ON to OFF Response: 0.1 ms
  • Status Indicator Location: Logic side
  • Fuses Rating and Type, Internal 8 amps (1 for each group of four circuits), fast blow. Total
  • current should not exceed 5 amps per group.
  • Internal Power Consumption, (5 VDC): Total; 150 mA (typ), 170 mA (max)
  • External Power Supply Requirements: Per On Point; 9 mA
  • Voltage: 24 VDC, 10%
  • Current: 50 mA maximum at 26.4 WC
  • TOTAL CURRENT SHOULD NOT EXCEED 10 AMPS PER COMMON
Mfr. Part No. Description
IC655MDL555 Current: 50 mA maximum at 26.4 WC

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click