Home Programmable Logic Controller (PLC) Fanuc IC655MDL576 PLC

Fanuc IC655MDL576 PLC

share
Fanuc IC655MDL576 PLC
Manufacturer: Fanuc

This module provides 16 isolated circuits for controlling user output loads. The output switching capacity of this module is two amps. 16 LEDs on the front of the module provide a dual function. They provide a visual indication of the status of each output circuit, with each LED reflecting the ON or OFF state of the corresponding circuit. When commanded through programming, they indicate the starting I/O address for the module. Connections to each circuit are made to the removable terminal block on the front of the module. Each circuit is isolated from the other circuits on this module relative to the ac power source. Each output has two terminals associated with it which allows different ac power sources for each circuit; e.g. different phases. These terminals are labeled Hl and 1, through H7 and 7. There are two groups of these connections on the terminal block. The user must supply the AC source (or sources) of power for the loads connected to the module’s output circuits.

More+
Features Model
  • Output Circuit Type: Triac
  • Number of Circuits: 16
  • Internal Circuit Grouping: Isolation between each circuit.
  • Operating Voltage: 15 to 265 VAC, 48 to 63 Hz
  • Peak Voltage: 265 VAC
  • Maximum Operating Current: 2.0 amps     
  • Maximum Leakage Current: 2 amps/common; 10 amps/module
  • ON Voltage Drop: 4.0 mA at 265 VAC, 60 Hz
  • Smallest Recommended Load: 1.5 VAC at 2 amps
  • Maximum Inrush current: 10.0 mA at 15 VAC  8 amps for 10 ms; 4 amps for 100 ms
  • OFF to ON Response: < 1 ms at 60 Hz
  • ON to OFF Response: < 10 ms at 60 Hz
  • Status Indicator Location: Logic side
  • Fuses Rating and Type, Internal: 3 amps (1 for each circuit), fast blow
  • Internal Power Consumption, (5 VDC) Total; 560 mA (typ), 650 mA (max)
  • Per On Point; 35 mA
  • Weight 60 oz (920 g)
Mfr. Part No. Description
IC655MDL576 ON Voltage Drop, 4.0 mA at 265 VAC, 60 Hz

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click