Home Programmable Logic Controller (PLC) Fanuc IC655MDL580 PLC

Fanuc IC655MDL580 PLC

share
Fanuc IC655MDL580 PLC
Manufacturer: Fanuc

This module provides 16 normally-open relay circuits for controlling user output loads. Output switching capacity is two amps, resistive load. 16 LEDs on the module provide a dual function. They provide a visual indication of the status of each output circuit; each LED reflects the ON or OFF state of the corresponding circuit. When commanded through programmin g, the module’s starting I/O address is displayed. Circuit connections are made to the removable terminal block on the front of the module.

The output circuits are divided into two groups of eight. On the terminal block, they are labeled A and B, with each terminal in the group labeled 1 to 8. Each group of eight has a single common connection, labeled H. This terminal serves as the hot or common terminal for AC loads or DC loads. The user must supply the AC or DC source of power for loads connected to the module’s output circuits, and 24 VDC to power the module’s output circuitry.

More+
Features Model
  • Output Circuit Type: Relay Contact, Normally Open
  • Number of Circuits: 16
  • Internal Circuit Grouping: Two groups, eight circuits per group
  • Operating Voltage: 5 to 30 VDC or 5 to 265 VAC
  • Peak Voltage: 265 VAC
  • Maximum Operating Current: 5.0 amps resistive load; any rated AC voltage  8 amps/common; 16 amps/module
  • Maximum Leakage Current: 0.1 mA at 265 VAC, 60 Hz
  • Smallest Recommended Load: 5.0 mA at 5 VAC/DC
  • Maximum Inrush current: 5 amps
  • OFF to ON Response: < 12 ms
  • ON to OFF Response: < 12 ms
  • Status Indicator Location: Logic side
  • Fuses Rating and Type, Internal: 8 amps (1 for each group, fast blow)
  • Internal Power Consumption, (5 VDC)
  • External Power Supply Requirements: Total; 152 mA (typ), 180 mA (max)
  • Each On Point; 9.5 mA
  • Voltage: 24 VDC
Mfr. Part No. Description
IC655MDL580 External Power Supply Requirements, Total; 152 mA (typ), 180 mA (max)

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click