Home Programmable Logic Controller (PLC) Fanuc IC660BPM100 PLC

Fanuc IC660BPM100 PLC

share
Fanuc IC660BPM100 PLC
Manufacturer: Fanuc

A Block PowerTRAC GE Genius IO IC660BPM100 has 115Vac/125Vdc power. The GE Genius IO IC660BPM100 calculates RMS voltage, current, active power, reactive power, KWH, and power factor. The GE Genius IO IC660BPM100 monitors current and voltage inputs and stores digitized waveform values for each input.

The Power Monitoring Block (IC66*BPM100) monitors current and voltage inputs and stores

digitized waveform values for each input. From these values, the block calculates RMS values of voltage, current, active power, reactive power, KWH, and power factor. Frequency is also measured. The block automatically sends this calculated data to a programmable controller or host computer approximately twice per second. The same data can be displayed on a Hand-held Monitor from any location on the bus.

More+
Features Model
  • Accurately measures the RMS values of voltage, current, power, VARs, power factor, and watthours, even with distorted waveforms.
  • Measures line frequency.
  • Detects and captures overcurrent waveforms above a configurable current level.
  • Indicates magnitude of system harmonic content.
  • For both wye (4-wire) and delta (3-wire) systems.
  • Simple user connections.
  • Direct connection for up to three potential transformers and three line current transformers plus one neutral current transformer.
  • Low current transformer burden (less than 0.1VA).
  • Software configurable, including scaling.
  • Small size and rugged design for mounting in electrical distribution and process equipment.
  • Integral power supply accepts either 115/230 VAC or 125 VDC inputs.
  • Can be installed on bus up to 7500 feet from host.
  • Compatible with CPU redundancy configurations.
  • Can be used for stand-alone monitoring without a host.
Mfr. Part No. Description
IC66BPM100 voltage: 0 to 327 Kvolts

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click