Home Programmable Logic Controller (PLC) Fanuc IC670CHS004 PLC

Fanuc IC670CHS004 PLC

share
Fanuc IC670CHS004 PLC
Manufacturer: Fanuc

The Thermocouple Terminal Block (IC670CHS004), which has two built-in thermistors, can be used to provide local reference junction compensation for thermocouples used in conjunction with Field Control Thermocouple modules.

Thermocouples are connected to the screw terminals on the Thermocouple Terminal Block.

Thermocouple modules are installed on a separate I/O Terminal Block (IC670CHS003, -002, or -001) and connected to Wire-to-Board connectors on the Thermocouple Terminal Block. Terminal Block IC670CHS003 provides connector to connector installation.

The thermocouple terminal block GE Field Control IC670CHS004 can be used to provide local reference junction compensation for thermocouples used in conjunction with field control thermocouple modules. The GE Field Control IC670CHS004 has two built-in thermistors. GE Field Control IC670CHS004 provides connector to connector installation.

More+
Features Model
  • Tilt the terminal block and position it over the rail, catching the rail behind the tabs in the terminal block.
  • Pivot the terminal block downward until the spring-loaded latches click into place.
  • Tighten the DIN rail clamp screw. Maximum recommended torque is 8 in/lbs to 10 in/lbs.
Mfr. Part No. Description
IC670CHS004 TC Cold Junction Compensation Base

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click