Home Programmable Logic Controller (PLC) Fanuc IC670MDL233 PLC

Fanuc IC670MDL233 PLC

share
Fanuc IC670MDL233 PLC
Manufacturer: Fanuc

The 120VAC Isolated Input Module GE Field Control IC670MDL233 provides 8 isolated discrete inputs. Intelligent processing for the GE Field Control IC670MDL233 module is performed by the Bus Interface Unit or elsewhere in the system. A network of resistors and capacitors establishes input thresholds and provides input filtering on the GE Field Control IC670MDL233.

More+
Features Model
  • I/O Terminal Block wiring assignments for this module are shown below.
  • The Terminal Block with box terminals has 25 terminals for each module, each of which accommodates one AWG #14 (avg 2.1mm2 cross section) to AWG #22 (avg 0.36mm2 cross section) wire, or two wires up to AWG #18 (avg. 0.86mm2 cross section). When an external jumper is used, the wire capacity is reduced from AWG #14 (2.10mm2) to AWG #16 (1.32mm2).
  • The I/O Terminal Block with barrier terminals has 18 terminals per module. Each terminal can accommodate one or two wires up to AWG #14 (avg 2.1mm2 cross section).
  • The I/O Terminal Block with Connectors has one 20-pin male connector per module. The mating connector is Amp part number 178289–8. Any tin-plated contact in the AMP D–3000 series can be used with the connector (Amp part number 1–175217–5 for high contact force receptacle for 20–24 gauge (0.20–0.56mm2) wires, 1–175218–5 for high contact force receptacle for 16–20 gauge (0.56–1.42mm2) wires).
Mfr. Part No. Description
IC670MDL233 Input Voltage Range, 0–132 VAC (47–63 Hz)

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click