Fanuc IC693MDL760 PLC

This GE Fanuc 90-30 IC693MDL760 output module provides eleven pneumatic outputs and five 24VDC sourcing outputs. The five 24VDC outputs on the GE Fanuc 90-30 IC693MDL760 can each drive up to a maximum 0.5A, with a limit of 2.0A total for all five points. The GE Fanuc 90-30 IC693MDL760 module is accessed from the logic program as a standard 16-point output module.

This IC693MDL760 output module provides eleven pneumatic outputs and five 24VDC sourcing outputs. For each pneumatic output, the module contains an internal 3-way solenoid-actuated valve and an associated output fitting, which is located on the front panel. When an output is turned ON, its internal valve connects a usersupplied pressure source (100 psi maximum) to the output fitting. The pressure source is connected to the fitting on the bottom of the module. When the output is turned OFF, the valve’s output port is vented to atmosphere inside the module. Solenoid power is supplied from an external 24VDC source to the “DC Outputs” connector on the front panel.

A 12-pin connector, located on the module’s front panel, allows the user to connect the optional IC693ACC760 Solenoid Forcing Pendent, described later.