The 24 volt DC Input/Relay Output module GE Fanuc 90-30 IC693MDR390 provides 8 input points with one common power input terminal, and has 8 normally-open relay circuits in the same GE Fanuc 90-30 IC693MDR390 module. Input characteristics are compatible with a wide range of user-supplied devices, such as:pushbuttons, limit switches, and electronic proximity switches on the GE Fanuc 90-30 IC693MDR390.
The 24 volt DC Input/Relay Output module for the Series 90-30 Programmable Logic Controller provides 8 input points with one common power input terminal, and 8 normally-open relay circuits in the same module. The input circuits are designed to have either positive or negative characteristics in that they sink or source current to/from the input devices to/from the user common and are arranged as one group of 8 inputs. The relay output circuits are arranged in two groups of four circuits each. Each group has a common power output terminal.
Input characteristics are compatible with a wide range of user-supplied devices, such as: pushbuttons, limit switches, and electronic proximity switches. Current through an input results in a logic 1 in the input status table (%I). Power to operate the field devices must be supplied by the user.
The normally-open relay circuits are used for controlling output loads provided by the user. The output switching capacity of each output is 2 amps. The relay outputs can control a wide range of user-supplied load devices, such as: motor starters, solenoids, and indicators. Power for the internal relay circuits is provided by the +24 volt DC bus on the backplane. The user must supply the AC or DC power to operate field devices. There are no fuses on this module.
Mfr. Part No. | Description |
IC693MDR390 | Input Voltage range, –30 to +32 volts DC |