The Iso-Max is a two channel line input isolator designed to eliminate noise in professional balanced audio systems by isolating the input of the connected device.
The design begins with a gray molded assembly made from UL94-VO flame retardant Noryl that snaps into place onto a standard 35 mm DIN rail for easy installation in a NEMA enclosure. Connections to and from the module are made via removable screw-down wire terminals. Plug and play easy to use, this passive interface does not require any power to work. Inside are two Jensen high performance transformers that are able to withstand signal levels to +19 dBu at 20 Hz without discernible distortion. These provide galvanic isolation between the input and output to eliminate hum and buzz caused by ground loops, rejecting noise by as much as 124 dB. To further optimize the performance, a choice of connection point options enable the user to determine the most appropriate grounding scheme to suit the installation.
You simply connect the between the source and the input destination to eliminate ground loops, electromagnetic interference (EMI) and RFI problems. The will quietly go to work without introducing distortion, phase shift or artifact of any kind.
Mfr. Part No. | Description |
DIN-2LI | Ruler flat frequency response, from 5 Hz to 40 kHz |