The Iso-Max is a universal isolator that gives you the freedom to solve noise problems anywhere in the signal chain.
The design begins with a gray molded assembly made from UL94-VO flame retardant Noryl that snaps into place onto a standard 35 mm DIN rail for easy installation in a NEMA enclosure. Connections to and from the module are made via removable screw-down wire terminals. Plug and play easy to use, this passive interface does not require any power to work. Inside is a specially designed Jensen multi-tap isolation transformer that provides unity gain, signal boost or level attenuation depending on how they are terminated. These are able to withstand signals in excess of +24 dB without discernible distortion while delivering a fabulously linear response to 200 kHz. This provides galvanic isolation between the input and output to eliminate hum and buzz caused by ground loops, rejecting noise by as much as 125 dB. To further optimize the performance, a choice of connection point options enable the user to determine the most appropriate grounding scheme to suit the installation.
Mfr. Part No. | Description |
DIN-PB | Ruler flat frequency response, from 1 Hz to 200 kHz |