Parker OSP-P Cylinder

Manufacturer: Parker

The OSP-P rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.

The OSP-P rodless actuator in bore sizes Ø10, Ø16, Ø25, Ø32, Ø40, Ø50, Ø63 and Ø80mm is a combined linear actuator, guidance and control package with additional functions designed into modular system components. Mounting rails on 3 sides of the cylinder enable modular components such as linear guides, brakes, valves, magnetic switches etc. to be fitted to the cylinder itself solving many installation problems, especially where space is limited and forms an ideal basis for additional customer specific functions providing total installation flexibility. Optimised cylinder profile for maximum stiffness and minimum weight, corrosion resistant steel outer sealing band, robust wiper system on the carrier for use in aggressive environments and a proven corrosion resistant steel inner band for optimum sealing. OSP-P is available as standard temperature -10°C to +80°C with high and low temperature options and can be supplied with optional active or passive dynamic braking. Long lifetime and service intervals up to 8,000km provide a unit ideally suited for point-to point operations, reciprocating movements and simple traverse / transfer applications.

More+

Features Model

Long Stroke Version : for extremely long strokes up to max. 41m. Bore sizes Ø50 – 80 mm
Clean Room Cylinders: for use in clean room applications, certified with the IPA-Certificate (to DIN EN ISO 14644-1). The special design of the linear drive enables all emissions to be led away. Bore sizes Ø16 – 32 mm
ATEX Version : for use in potentially explosive atmospheres in Equipment Group II, Category 2 GD. The cylinders are to the ATEX 94/9/EG (ATEX 95) for Pneumatic Components.
Stainless Steel Version : for use in constantly damp or wet environments. All screws are A2 quality stainless steel (material no.1.4301 / 1.4303)
Slow Speed Version : specially formulated grease lubrication facilitates slow, smooth and uniform piston travel in the speed range from 0.005 to 0.2 m/s. Minimum achievable speeds are dependent on several factors. Please consult our technical department. Slow speed lubrication in combination with Viton on demand. Oil free operation referred.
High Speed Version : up to 30 m/s. Please consult our technical department. Bore sizes Ø25 – 32 mm
High Temperature Version : for use in an environment with high temperatures (up to +120°C ) or in chemically aggressive areas. All seals are made of Viton. Sealing bands: Stainless steel.
Low Temperature Version : for use in an environment with low temperatures ( down to -40°C )
End Face Air Connection : in some situations it is necessary or desirable to fit a special end cap with the air connection on the end-face instead of the standard end cap with the air connection on the side. The special end cap can also be rotated 4 x 90° to locate the cushion adjustment screw as desired. Bore sizes Ø16 – 80 mm
Both Air Connections at One End : a special end cap with both air connections on one side is available for situations where shortage of space, simplicity of installation or the nature of the process make it desirable. Air supply to the other end is via internal air passages (OSP-P25 to P80) or via a hollow aluminium profile fitted externally (OSP-P16). In this case the end caps cannot be rotated. Bore sizes Ø16 – 80 mm
Integrated 3/2 Way VOE Valves : for optimal control of the OSP-P cylinder, 3/2 way valves integrated into the cylinder's end caps can be used as a compact and complete solution. They allow for easy positioning of the cylinder, smooth operation at the lowest speeds and fast response, making them ideally suited for the direct control of production and automation processes. Bore sizes Ø25 – 50 mm
Duplex Connection : the duplex connection combines two OSP-P cylinders of the same size into a compact unit with high performance. Bore sizes Ø25 – 50 mm

Mfr. Part No.	Description

Parker OSP-P Cylinder

Inquiry

Most Searched Keywords