Parker P5E Cylinder

The P5E series guided cylinder is designed to be a lighter weight solution for standard duty linear motion applications. Two parallel precision ground case hardened, or stainless steel, support shafts are guided by four linear bushings and incorporated into the body assembly. The bearings are prelubricated to provide millions of trouble-free cycles. Composite bushings are standard with all three shaft styles and available with oversized shafting. Optional linear ball bearings are available with stainless steel shafting only. The P5E series features a one-piece cast aluminum body with tapped and counterbored mounting holes. Standard dowel pin holes provide precision mounting for the body and tool plate. The P1D cylinder utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.

P5E is a low profile, light weight, standard duty guided assembly, powered by ISO cylinders. The max operating pressure is 145 psi. Bore sizes are 32, 40, 50, 63, 80 & 100mm. Rod lock & oversize rod options are available