Home Programmable Logic Controller (PLC) Siemens 6ES Front Connector

Siemens 6ES Front Connector

share
Siemens 6ES Front Connector
Manufacturer: Siemens

Screw-type terminals, crimp contacts or spring-loaded terminals for connecting the wiring.

A removable cover to protect the cables.With writable wiring diagram on the inside and labeling plate on the outside.

Labeling plates: A labeling plate on the front connector, a wiring diagram on the inside of the cover and a labeling field on the outside.

Two-component coding key: When the front connector is plugged into the module for the first time, one part of the coding key latches into the front connector. The other part element remains on the module. The front connector can then only be plugged into signal modules with the corresponding part of the coding element.

More+
Features Applications Model
  • For simple and user-friendly connection of sensors and actuators
  • For retaining the wiring when replacing modules
  • With coding to avoid mistakes when replacing modules
  • The front connector facilitates user-friendly connection of sensors and actuators to the signal modules.
  • All that is necessary when replacing modules is to remove the front connector. The days when you had to change all the individual wires are over.
  • In order to avoid mistakes when replacing a module, the front connector is coded when plugged in for the first time. From then on it will only fit on modules of the same type.
  • The front connector is available with your choice of.
  • Screw-type contacts, Crimp contacts or Spring terminals.
Mfr. Part No. Description
6ES7431-7KF00-6AA0 SIMATIC S7-400, FRONT CONNECTOR FOR MODULE 6ES7431-7KF00-0AB0 WITH TEMPERATURE REFERENCE, WITH SCREW CONTACTS, 20 PIN ALREADY CONTAINED IN THE SCOPE OF SUPPLY OF THE MODULE

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click