Home Programmable Logic Controller (PLC) Siemens CMDP Module

Siemens CMDP Module

share
Siemens CMDP Module
Manufacturer: Siemens

The CM DP module operates as a DP-V1 master and processes the data transfer completely independently. It also supports the acyclic standard services, including interrupt handling. During normal operation, it is also possible to activate or deactivate DP slaves. Among other things, this allows the step-by-step commissioning of subprocesses. A diagnostic repeater allows the line to be diagnosed during operation, enabling line faults to be detected at an early stage. The CM DP module supports operation with a diagnostic repeater (including activation of topology identification on the diagnostic repeater).

It is possible to connect PROFIBUS slaves, e.g. CM 1242-5 as a DP slave, DP slaves of the ET 200 distributed I/O, etc.

This creates the possibility for the ET 200SP CPU of setting up a further distributed I/O in addition to the network of the integrated PROFINET interface.

The CM DP module operates as a DP slave and processes the data transfer completely independently. It thus connects the ET 200SP CPU as intelligent slave to a higher-level DP master.

This creates the possibility for the ET 200SP CPU being connected to an existing PROFIBUS DP network as intelligent slave in addition to the network of the integrated PROFINET interface.

More+
Features Applications Model
  • PROFIBUS DP master/slave with electrical interface for connecting the ET 200SP CPUs to PROFIBUS at up to 12 Mbit/s
  • Expands the ET 200SP CPUs 1510SP-1 PN / 1512SP-1 PN by one PROFIBUS connection
  • For communication with lower-level PROFIBUS devices at bandwidths of 9.6 kbit/s to 12 Mbit/s
  • Communication services: PROFIBUS DP
  • PG/OP communication
  • S7 communication: This makes it possible to establish communication between the ET 200SP CPU and other devices, for example those from the SIMATIC S7-300/400/1500 range.
  • Time synchronization
  • Simple programming and configuration over PROFIBUS
  • Cross-network PG communication using S7 routing
  • Data set routing
  • Offloading of the central controller by means of distributed preprocessing
  • CPU 1510SP-1 PN or CPU 1512SP-1 PN possible in standalone mode as DP master
  • As master for PROFIBUS DP according to IEC 61158/EN 50170 for 125 DP slaves
  • As intelligent DP slave for higher-level PROFIBUS DP master on PROFIBUS DP
  • Communication with programming devices and HMI devices
  • Communication with other SIMATIC S7 systems
  • Communication with SIMATIC S5 programmable controllers
Mfr. Part No. Description
6ES7545-5DA00-0AB0 ET 200SP, CM DP FOR ET 200SP CPU

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click