Home Programmable Logic Controller (PLC) Siemens F-CMAS-I Safety ST

Siemens F-CMAS-I Safety ST

share
Siemens F-CMAS-I Safety ST
Manufacturer: Siemens

The FCM ASi Safety ST fail-safe communication module supplements an AS-Interface network without additional wiring to produce a safety-related AS-i network.

The fail-safe F-CM AS-i Safety ST module has an ET 200SP module enclosure with a width of 20 mm.

One AS-i master according to the AS-i Specification V3.0 and fail-safe AS-i input slaves and/or AS-i safety output modules are needed for operation. The CM AS‑i Master ST communication module (article no. 3RK7137‑6SA00‑0BC1) is recommended as the AS‑i master for the ET 200SP; see “CM AS‑i Master ST for SIMATIC ET 200SP”.

Simple combination of the CM AS‑i Master ST and F‑CM AS‑i Safety ST modules in one ET 200SP station results in a powerful PROFIBUS or PROFINET/AS‑i F‑Link, which can be expanded further in a modular fashion.

More+
Features Applications Model
  • Fail-safe communication module for the ET 200SP
  • 31 fail-safe input channels in the process image
  • 16 fail-safe output channels in the process image
  • Certified up to SIL 3 (IEC 62061/IEC 61508), PL e (EN ISO 13849‑1)
  • Parameterization conforms with other fail-safe I/O modules of the ET 200SP
  • The communication module supports PROFIsafe in PROFINET and PROFIBUS configurations. Can be used with fail-safe SIMATIC S7‑300F/S7‑416F CPUs and S7‑1500F CPUs (TIA Portal V13 SP1 and higher with HSP 0070 V2.0).
  • For reading up to 31 fail-safe AS-i input slaves
  • 2 sensor inputs/signals for each fail-safe AS‑i input slave
  • Adjustable evaluation of sensor signals: 2-channel or 2 x 1-channel
  • Integrated discrepancy evaluation in the case of 2-channel signals
  • Integrated AND operation in the case of 2 x 1-channel signals
  • Input delay can be parameterized
  • Start-up test can be set
  • Sequence monitoring can be activated
  • For control of up to 16 fail-safe AS-i output circuit groups
  • The output circuit groups are controlled independently of one another.
  • One output circuit group can act on one or more actuators (e.g. to switch drives simultaneously).
  • An actuator (e.g. a contactor) is interfaced via an AS‑i safety output module (e.g. SlimLine S45F safety module, Article No. 3RK1405‑1SE15‑0AA2; see "ASIsafe" → "Fail-safe AS-Interface modules").
  • Simple fault acknowledgment via the process image
  • Simple module replacement thanks to automatic importing of the safety parameters from the coding element
  • Comprehensive diagnostic options
  • Can be plugged onto type C1 or type C0 BaseUnits (BU)
  • Supply via AS-Interface voltage
  • 8 LED indicators for diagnostics, operating state, fault indication and supply voltage
  • Informative front-side module inscription
  • Plain-text marking of the module type and function class
  • 2D matrix code (Article no. and serial number)
  • Connection diagram
  • Color coding of the CM module type: light gray
  • Hardware and firmware version
  • Thanks to use of the fail-safe module in the ET 200SP, it is possible to fulfill the safety-related application requirements in a manner that is integrated in the overall automation solution.
  • The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is realized via PROFIsafe.
  • The safety application is programmed in the SIMATIC S7 F‑CPU with Distributed Safety. The fail-safe input signals of the ASIsafe slave modules are read via the AS‑i bus line and are combined with any chosen further signals in the fail-safe program.
  • The fail-safe output signals can be output via safe SIMATIC output modules or also directly via AS‑i – with the aid of safe AS‑i output modules, e.g. SlimLine S45F safety modules, article number 3RK1405‑1SE15‑0AA2 (see “ASIsafe” → “AS‑Interface Safety Modules”). No special functions are required for this in the program.
  • Operation with SINUMERIK 840D sl is possible with software version V4.7 or higher.
  • Together with an ET 200SP F‑CPU 1510SP F/1512SP F (firmware V1.8 or higher), preprocessing of safe AS‑i signals directly in the ET 200SP station and setting up of an independent AS‑i Safety station without a higher-level CPU is possible.
Mfr. Part No. Description
3RK7136-6SC00-0BC1 SIMATIC ET 200SP SAFETY COMMUNICATION MODULE F-CM AS-I SAFETY ST FOR AS-INTERFACE

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click