The modules are mounted on the DIN rail, and connected to the adjacent modules by means of bus connectors. There are no slot rules, the addresses of the inputs are determined by the slot.
When used in the ET 200M distributed I/O system together with active bus modules, hot swapping of the modules is possible. The remaining modules continue to operate.
The modules are wired via a front connector. When the module is connected for the first time, a coding latches in the connector so that the connector now only fits onto modules of the same type. When a module is replaced, the front connector can be used for the new module of the same type with the complete wiring.
The required sensor power supplies (test outputs) are made available in the case of the fail-safe input modules. These test outputs can be activated by setting parameters.
Mfr. Part No. | Description |
6AG1138-4FA05-2AB0 | SIPLUS ET200S F-DI 24V PROFISAF -25 ... +60 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7138-4FA05-0AB0 . ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF |