Home Programmable Logic Controller (PLC) Siemens SIPLUSS7-400CP443-5 Extended Module

Siemens SIPLUSS7-400CP443-5 Extended Module

share
Siemens SIPLUSS7-400CP443-5 Extended Module
Manufacturer: Siemens

The CP 443-5 Extended operates as DP-V1 master. It processes data transfer autonomously and allows slaves to be connected, such as CP 342-5 as DP slave, DP slaves of the ET 200 distributed I/O system, etc. This means that the CP 443-5 Extended is able to connect the S7-400 station to PROFIBUS DP and is the ideal expansion to the integral DP master interfaces of the S7-400 CPUs for establishing additional PROFIBUS DP lines.

The CP 443-5 Extended can also be used in the SIMATIC S7 H system as a redundant DP master.

The CP 443-5 Extended is a DP-V1 master, i.e. it also supports the acyclic standard services incl. interrupt handling.

The CP 443-5 Extended also supports the SYNC and FREEZE functions, constant bus cycle time, direct slave-to-slave traffic, data set routing and changes to the configuration of the assigned distributed I/O during normal operation.

During normal operation, it is also possible to activate or deactivate DP slaves. This supports the step-by-step start-up of subprocesses, for example.

A diagnostic repeater allows the line to be diagnosed during operation, enabling line faults to be detected at an early stage. The CP 443-5 Extended supports operation with diagnostic repeater (including activation of topology identification in the diagnostic repeater).

The distributed I/Os are handled like central I/Os from the user's point of view. This means that there are no differences between the CP 443-5 Extended and the integral DP master interface of the S7-400 CPU with regard to configuration and parameterization. Depending on the scale of the system, the CP 443-5 Extended has extremely short response times.

More+
Features Applications Model
  • DP-V1 master connection of the S7-400 to PROFIBUS
  • For setting up additional PROFIBUS DP lines
  • Communications services:
  • PROFIBUS DP
  • PG/OP communication
  • S7 communication
  • S5-compatible communication (SEND/RECEIVE)
  • Clock synchronization
  • Easy programming and configuration over PROFIBUS
  • Cross-network programming device communication through S7 routing
  • Can be easily integrated into the SIMATIC S7-400 system
  • Module replacement without PG
  • SIMATIC H system operation for redundant S7 communication or DP master communication
  • Data record routing (PROFIBUS DP)
  • Adding or modifying distributed I/O during operation
  • As master for PROFIBUS DP according to IEC 61158/EN 50170
  • Communication with programming devices and HMI devices
  • Communication with other SIMATIC S7 systems
  • Communication with SIMATIC S5 programmable controllers
Mfr. Part No. Description
6AG1443-5DX05-4XE0 SIPLUS NET CP443-5 FOR MEDIAL STRESS BASED ON 6GK7443-5DX05-0XE0 . COMMUNICATION PROCESSOR EXTENDED FOR CONNECT. OF SIMATIC S7-400 TO PROFIBUS, DP, S5-COMPATIBLE PG/OP- AND S7-COMMUNICATION

Inquiry

Your Name: * name not null!
Email: * name not null!
Additional Information: * name not null!
Add more information ( Optional )
Code: *
click